Dect Phone Screen - ZyXEL Communications P-2302HWUDL-P1 Series User Manual

P-2302hwudl-p1 series 802.11g wireless voip station gateway with built-in dect base station
Hide thumbs Also See for P-2302HWUDL-P1 Series:
Table of Contents

Advertisement

Chapter 10 Phone
Table 69 DECT Phone Calls Summary
TYPE OF CALL
3 Way
Conference
The ZyXEL Device allows up to four DECT phones to be active at one time.
The ZyXEL Device does not control how your DECT phone distinguishes between internal
and external calls. Typically, a DECT phone has a button labeled int to indicate an internal
call. Consult your DECT phone documentation for differences in making internal and external
calls.
10.3.2.1 DECT Phones - Internal Calls
To make internal calls, you need to know the phone numbers of the other DECT phones
registered with the ZyXEL Device. The ZyXEL Device assigns numbers based on the order
that the DECT phones registered with the ZyXEL Device's DECT base station. The first
DECT phone that registered with the ZyXEL Device's DECT base station receives the number
1, the second the number 2, and so on up to the last registered DECT phone.
Refer to your DECT phone documentation for specific details regarding your phone's calling
functions.
10.3.2.2 DECT Phones - External Calls
To make external calls, follow the same procedure as with the analog phone connected to the
ZyXEL Device. You must also:
• Specify the SIP accounts for incoming and outgoing VoIP calls.
• Specify whether the DECT phones should receive calls on the PSTN line. (P-
2302HWUDL-P1 model only)
When you assign a specific SIP account to be used with the DECT phone for outgoing or
incoming calls, all of the DECT phones registered with the ZyXEL Device use this SIP
account for making or receiving calls.
10.3.2.3 DECT Phones - Supplementary Services
There are two ways to perform supplementary phone services like call waiting, conference
calling and so on.
• Via the handset - refer to your DECT phone documentation.
• Via the flash key function - refer to
models the flash key is the "R" key.

10.3.3 DECT Phone Screen

Use this screen to configure your DECT base station settings. To access this screen, click
VoIP > Phone > DECT Phone.
156
DESCRIPTION
A call between two DECT phones
registered with the ZyXEL Device
base station and an external
connection.
Section 10.1.3 on page
LIMITS
One call.
147. On most DECT phone
P-2302HWUDL-P1 Series User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-2302hwud-p1

Table of Contents