Remote Management Limitations; System Timeout - ZyXEL Communications NWA-3160 Series User Manual

25.3.5 Remote Management Limitations

Remote management over LAN or WAN will not work when:
1 You have disabled that service in menu 24.11.
2 The IP address in the Secured Client IP field (menu 24.11) does not match the client IP
address. If it does not match, the ZyXEL Device will disconnect the session
immediately.
3 There is already another remote management session of the same type (Telnet, FTP or
Web) running. You may only have one remote management session of the same type
running at one time.
4 There is a web remote management session running with a Telnet session. A Telnet
session will be disconnected if you begin a web session; it will not begin if there already
is a web session.

25.4 System Timeout

There is a system timeout of five minutes (300 seconds) for Telnet/web/FTP connections. Your
ZyXEL Device will automatically log you out if you do nothing in this timeout period, except
when it is continuously updating the status in menu 24.1 or when sys stdio has been
changed on the command line.
ZyXEL NWA-3160 Series User's Guide
Chapter 25 System Maintenance and Information
241