Example Log Messages; Table 66 System Maintenance Logs; Table 67 Icmp Notes - ZyXEL Communications NWA-3160 Series User Manual

Chapter 15 Log Screens

15.3 Example Log Messages

This section provides descriptions of some example log messages.

Table 66 System Maintenance Logs

LOG MESSAGE
Time calibration is
successful
Time calibration failed
DHCP client gets %s
DHCP client IP expired
DHCP server assigns %s
SMT Login Successfully
SMT Login Fail
WEB Login Successfully
WEB Login Fail
TELNET Login
Successfully
TELNET Login Fail
FTP Login Successfully
FTP Login Fail

Table 67 ICMP Notes

TYPE
0
3
4
5
178
DESCRIPTION
The router has adjusted its time based on information from the time
server.
The router failed to get information from the time server.
A DHCP client got a new IP address from the DHCP server.
A DHCP client's IP address has expired.
The DHCP server assigned an IP address to a client.
Someone has logged on to the router's SMT interface.
Someone has failed to log on to the router's SMT interface.
Someone has logged on to the router's web configurator interface.
Someone has failed to log on to the router's web configurator
interface.
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the router via FTP.
Someone has failed to log on to the router via FTP.
CODE DESCRIPTION
Echo Reply
Echo reply message
0
Destination Unreachable
Net unreachable
0
Host unreachable
1
Protocol unreachable
2
Port unreachable
3
A packet that needed fragmentation was dropped because it was set to Don't
4
Fragment (DF)
Source route failed
5
Source Quench
A gateway may discard internet datagrams if it does not have the buffer space
0
needed to queue the datagrams for output to the next network on the route to the
destination network.
Redirect
Redirect datagrams for the Network
0
Redirect datagrams for the Host
1
Redirect datagrams for the Type of Service and Network
2
Redirect datagrams for the Type of Service and Host
3
ZyXEL NWA-3160 Series User's Guide