Chapter 17 Maintenance
17.2.1 System Statistics
Click Maintenance > Show Statistics. Read-only information here includes port status,
packet specific statistics and bridge link status. Also provided are "system up time" and "poll
interval(s)". The Poll Interval field is configurable. The fields in this screen vary according to
the current wireless mode.
Figure 130 System Status: Show Statistics
The following table describes the labels in this screen.
Table 74 System Status: Show Statistics
LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
Poll Interval(s)
Set Interval
Stop
17.3 Association List
View the wireless stations that are currently associated with the ZyXEL Device in the
Association List screen.
Click MAINTENANCE > Association List to display the screen as shown next.
200
DESCRIPTION
This is the Ethernet port (LAN) or wireless LAN.
This shows the port speed and duplex setting if you are using Ethernet
encapsulation for the Ethernet port. Ethernet port connections can be in half-
duplex or full-duplex mode. Full-duplex refers to a device's ability to send and
receive simultaneously, while half-duplex indicates that traffic can flow in only
one direction at a time. The Ethernet port must use the same speed or duplex
mode setting as the peer Ethernet port in order to connect.
This shows the transmission speed only for the wireless adaptors.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This shows the transmission speed in bytes per second on this port.
This shows the reception speed in bytes per second on this port.
This is total amount of time the line has been up.
Enter the time interval for refreshing statistics.
Click this button to apply the new poll interval you entered above.
Click this button to stop refreshing statistics.
ZyXEL NWA-3160 Series User's Guide