ZyXEL Communications NWA-3160 Series User Manual page 46

Chapter 3 Status Screens
Table 3 The Status Screen
LABEL
Model
Firmware Version
System Up Time
Current Date Time
WLAN Operating
Mode
Management VLAN
IP
LAN MAC
WLAN MAC
System Resources
Flash
Memory
CPU
WLAN Associations
Interface Status
Interface
Status
Rate
SSID Status
SSID
BSSID
Security
46
DESCRIPTION
This field displays the ZyXEL Device's exact model name.
This field displays the current version of the firmware inside the device. It
also shows the date the firmware version was created. You can change the
firmware version by uploading new firmware in Maintenance > F/W
Upload.
This field displays the elapsed time since the ZyXEL Device was turned on.
This field displays the date and time configured on the ZyXEL Device. You
can change this in the System > Time Setting screen.
This field displays the current operating mode of the first wireless module
(AP, Bridge / Repeater, AP + Bridge or MBSSID). You can change the
operating mode in the Wireless > Wireless screen.
This field displays the management VLAN ID if VLAN is active, or
Disabled if it is not active. You can enable or disable VLAN, or change the
management VLAN ID, in the VLAN > Wireless VLAN screen.
This field displays the current IP address of the ZyXEL Device on the
network.
This displays the MAC (Media Access Control) address of the ZyXEL
Device on the LAN. Every network device has a unique MAC address
which identifies it across the network.
This displays the MAC address of the wireless module.
This field displays the amount of the ZyXEL Device's flash memory
currently in use. The flash memory is used to store firmware and SSID
profiles.
This field displays what percentage of the ZyXEL Device's volatile memory
is currently in use. The higher the memory usage, the more likely the
ZyXEL Device is to slow down. Some memory is required just to start the
ZyXEL Device and to run the web configurator.
This field displays what percentage of the ZyXEL Device's processing
ability is currently being used. The higher the CPU usage, the more likely
the ZyXEL Device is to slow down.
This field displays the number of wireless clients currently associated with
the wireless module. Each wireless module supports up to 128 concurrent
associations.
This column displays each interface of the ZyXEL Device.
This field indicates whether or not the ZyXEL Device is using the interface.
For each interface, this field displays Up when the ZyXEL Device is using
the interface and Down when the ZyXEL Device is not using the interface.
For the LAN port this displays the port speed and duplex setting.
For the WLAN interface, it displays the downstream and upstream
transmission rate or N/A if the interface is not in use.
This field displays the SSID(s) currently used by the wireless module.
This field displays the MAC address of the wireless adaptor.
This field displays the type of wireless security used by each SSID.
ZyXEL NWA-3160 Series User's Guide