Example Log Messages; Table 80 System Maintenance Logs - ZyXEL Communications ZyXEL NWA3160 User Manual

Chapter 17 Log Screens
Table 79 Log Settings
LABEL
Log Facility
Send Log
Log Schedule
Day for Sending
Log
Time for Sending
Log
Clear log after
sending mail
Log
Send Immediate
Alert
Apply
Reset

17.3 Example Log Messages

This section provides descriptions of some example log messages.

Table 80 System Maintenance Logs

LOG MESSAGE
Time calibration is
successful
Time calibration failed
DHCP client gets %s
DHCP client IP expired
DHCP server assigns %s
SMT Login Successfully
SMT Login Fail
WEB Login Successfully
WEB Login Fail
202
DESCRIPTION
Select a location from the drop down list box. The log facility allows you to log
the messages to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
This drop-down menu is used to configure the frequency of log messages
being sent as E-mail:
• Daily
• Weekly
• Hourly
• When Log is Full
• None.
If the Weekly or the Daily option is selected, specify a time of day when the
E-mail should be sent. If the Weekly option is selected, then also specify
which day of the week the E-mail should be sent. If the When Log is Full
option is selected, an alert is sent when the log fills up. If you select None, no
log messages are sent.
This field is only available when you select Weekly in the Log Schedule field.
Use the drop down list box to select which day of the week to send the logs.
Enter the time of the day in 24-hour format (for example 23:00 equals 11:00
pm) to send the logs.
Select the check box to clear all logs after logs and alert messages are sent
via e-mail.
Select the categories of logs that you want to record.
Select the categories of alerts for which you want the ZyXEL Device to
immediately send e-mail alerts.
Click Apply to save your customized settings and exit this screen.
Click Reset to reconfigure all the fields in this screen.
DESCRIPTION
The router has adjusted its time based on information from the time
server.
The router failed to get information from the time server.
A DHCP client got a new IP address from the DHCP server.
A DHCP client's IP address has expired.
The DHCP server assigned an IP address to a client.
Someone has logged on to the router's SMT interface.
Someone has failed to log on to the router's SMT interface.
Someone has logged on to the router's web configurator interface.
Someone has failed to log on to the router's web configurator
interface.
ZyXEL NWA-3160 Series User's Guide