Selecting The User Setup - Olympus OEP-5 Instructions Manual

Selecting the User Setup

Select the user setup registered in "Save" in USER
PRESET menu.
Table 4.1
User Settings
numbers
1 Suitable for printing a normal/ultrasonic
endoscope image
2 Suitable for printing a normal/surgical
endoscope image
3 Suitable for printing a normal/ultrasonic
endoscope image
1
Press the "LOAD USER" button on the front panel
(see Figure 4.2).
LOAD USER button
Figure 4.2
The monitor and LCD panel display the current
setup for a few seconds. On the monitor, the user
number currently selected is displayed in green (see
Figure 4.3).
Monitor
User Name
LCD panel
Figure 4.3
2
While the monitor or LCD panel is as shown in
Figure 4.3, press the "LOAD USER" button, "b" or
"B" until the desired user number is displayed.
Each press of the "LOAD USER" button or "B"
changes the user number by one as "1" "2" "3"
"1" ....
Each press of "b" changes the user number by one
as "1" "3" "2" "1" ....
NOTE
The user setup can also be selected in the menu. The
setup made using the above procedure is also applied to
the setup using the menu. For details on menus, see
"Setting "Select"" on page 53.
4.2 Control From the Front Panel
User Number
39
4