Olympus OEP-5 Instructions Manual page 12

L
MULTI PICTURE button
In the normal display, press to select the number of
images to be stored in a memory page for multi-
picture printing. After the first press, the current
setup is displayed for a few seconds. Further
presses vary the setup in the cycle of 1, 2, 3, 4, 1,....
M
STOP button
Press to stop continuation printing. Printing stops
when the present printing is completed.
N
1 PRINT QTY button
Press to set the number of prints up to 10. After the
first press, the current setup is displayed for a few
seconds. The print quantity can also be changed in
the middle of printing by pressing this button.
O
CAPTURE button
Press to store the image in memory.
P
PRINT button
Press to start printing.
Q Paper exit
Printed sheets are output here.
R Paper tray
Print sheets are kept in this tray.
S
Remote sensor
When using the optional remote control unit (MAJ-
898) for wireless remote control of this instrument,
point the remote transmitter (top of remote control
unit) at the remote sensor.
T
ALARM lamp
Lights in amber in case of an error, such as paper
jam.
U
PRINT lamp
Lights during printing.
12
1.2 Front Panel