Olympus OEP-5 Instructions Manual page 65

2
Press "v" or "V" to select either "ON" or "OFF,"
and press the "ENTER" button.
"ON" (With white frames)
"OFF" (Without white frames)
Figure 5.14
Setting "CAPTION"
This screen is used to print a comment (caption) at the
bottom of the print picture (see Figure 5.15). You can
input up to 80 characters.
Printed picture
Caption
Figure 5.15
NOTE
When this instrument is controlled from the EVIS
EXERA Video System Center (CV-160) , enter captions
from the connected equipment.
Entering from this instrument when the EVIS EXERA
Video System Center (CV-160) is connected may fail to
enter the desired caption.
1
Press "v" or "V" to select "CAPTION," and press
the "ENTER" button to display the "CAPTION"
entry screen.
"CAPTION : ON" appears on the top left of the
screen (see Figure 5.16).
Figure 5.16
2
Press "v," "V," "b" or "B" to move the cursor on
the character to be entered.
3
Press the "ENTER" button.
4
Enter the caption by repeating steps 2 and 3 for each
character.
To change the position in which a character
is entered
1 Press "v," "V," "b" or "B" to move the cursor
on "R," "r," "T" or "t."
2 Press the "ENTER" button.
The character entry position moves in the
direction of the arrow.
To switch the uppercase and lowercase
letters
1 Press "v," "V," "b" or "B" to move the cursor
on "SHIFT."
2 Press the "ENTER" button.
When uppercase letters are displayed, they are
switched to lowercase letters.
When lowercase letters are displayed, they are
switched to uppercase letters.
To delete a character
1 Press "v," "V," "b" or "B" to move the cursor
on "DEL."
2 Press the "ENTER" button.
5.12 Setup of the "LAYOUT SETUP" Menu
5
65