Olympus OEP-5 Instructions Manual page 34

Table 3.1
Connected Instruction Manual
equipment references
IMH-20, 10 "4.2 Recording setting
(User settings)"
"4.3 Setting about recording
(System settings)"
"Setting the functions"
"Devices"
UCES-3 No setup required.
UCES-2 "5.14 Operating the system
installation screen"
3
34
3.1 Setup of Connected Equipment
Setup Item Setup
"REMOTE1" "OEP-5"
"Layout" "1 image (1 × 1)"
"2 images (1 × 2)"
"4 images (2 × 2)"
"Caption" "Print"
"Not print"
"REMOTE1" "OEP-5"
"Video printer" "OEP-4"
Note
Select the model of printer to connect. Be sure
to set this item to "OEP-5" when using this
instrument.
Select the number of multi-pictures to be
printed. Select one of listed setup items. "8
images (4 × 2)" is not supported.
Select the information to be printed in the
margin of print sheet.
Select the model of printer to connect. Be sure
to set this item to "OEP-5" when using this
instrument.
Select the model of printer to connect. The
settings required may vary depending on the
software version. For details, refer to the
instruction manual supplied with this
instrument.