Olympus OEP-5 Instructions Manual page 33

Table 3.1
Connected Instruction Manual
equipment references
OTV-S7Pro "9.2 System setup"
"Printer"
"9.3 User preset"
"Scope switch and Foot
switch"
"9.3 User preset"
"Release function"
OTV-S7V "5.12 Remote control
switches"
"5.13 Setting a function to
the keyboard"
OTV-SI "5.9 Remote control
switches"
EU-ME1 "9.2 System setup"
"Scope switches"
EU-M30S No setup required.
EU-M60 "6.3. Setup":
"System setup – Scope
switch"
"6.3. Setup":
"System setup – Remote
control"
EU-C60 "6.3. Setup":
"Setting up a video printer"
Setup Item Setup
"Type" "OEP4"
"Qty. "N"" "4" – " 9"
"Caption" Max. 32 characters. Input the characters to be printed in the margin
"Release Time" "0.5sec" "1sec"
"1.5sec" "2sec"
"OEP4 mode" "Mode1" "Mode2"
"Scope switch" "Release1"
"Switch1" "Release2"
"Switch2"
"Switch3"
"Switch4"
"Foot switch"
"Switch1"
"Switch2"
"Release" "CVP"
"Release1"
"Release2"
Remote control "REL.+DIG. CAP."
switch on the "RELEASE"
videoscope or
camera head
"F4" key "REL.+DIG. CAP."
"RELEASE"
Remote control "RELES"
switch on the
videoscope or
camera head
"U1 (F) Switch" "Release"
"U2 (R) Switch"
"U3 (S) Switch"
Scope switches "Release"
"U1(F) switch" "Save & release"
"U2(R) switch"
"U3(S) switch"
"REMOTE PRN2" "Color video
printer"
"printer" "on"
Note
Select the printer type. Be sure to set "Type"
to "OEP4" when using this instrument.
Select the print quantity when the "Print
quantity indicator" on the keyboard is set to
"N." Select any setting, as required.
of print sheet.
Before the images are read by the printer, set
the time while still images from the endoscope
are captured.
Select the output signal format for the
endoscope image. Select "Mode1" when
HDTV signals are input.
Select the function to be controlled from the
scope switch and foot switch on the camera
head. Select any setting, as required.
Select the instrument to be controlled from
"Release1" and "Release2" that are assigned
to the scope switch and foot switch on the
camera head. Be sure to set this item to "CVP"
when using this instrument. The RELEASE
key of the keyboard performs the same
function as "Release1."
Select the function to be controlled from the
remote control switch on the videoscope or
camera head. Select any setting, as required.
Select the function to be activated with the
"F4" key on the keyboard. Select any setting.
Input them, as required.
Select the function to be controlled from the
remote control switch on the videoscope or
camera head.
Select any setting, as required.
Select the function to be controlled from the
scope switch of the ultrasound endoscope.
Select any setting, as required.
Select the functions to be controlled from the
scope switches on the ultrasound endoscope.
Select any setting, as required.
Select the type of the storage device to be
remote controlled.
Be sure to set this item to "Color video
printer" when using this instrument.
Select whether or not the video printer is used.
Be sure to set this item to "on" when using this
instrument.
3.1 Setup of Connected Equipment
3
33