16.2
Setting I/O Numbers
When changing I/O numbers of each slot, a new start I/O number can be entered for each slot.
For details of setting I/O number, refer to the following.
QnUCPU Users Manual (Function Explanation, Program Fundamentals)
Setting/Monitoring Tools for the C Controller Module Version 4 Operating Manual
For this setting, use the following functions in Setting/monitoring tools for the C Controller module.
•
Project view "Parameter" "CCPU Parameter" <<I/O assignment settings>>
"I/O Assignment"
On the I/O Assignment tab, the following items can be set for each slot on the base unit.
• "Points" (I/O points)
• "Start XY" (start I/O number)
• "Type" (module type)
To change the I/O number of the specified slot, setting is allowed only to the number of points.
CHAPTER 16 I/O NUMBER ASSIGNMENT
16
301