Service Setting Function - Mitsubishi Electric MELSEC Q Series User Manual

11.8.4

Service setting function

This function sets the services status (enable/disable) operated on the C Controller module.
By restricting the service which can be performed, accessing from an unexpected user can be prevented.
(1) List of services
Item
The service in which the account authority is limited to the
administrator or maintenance user
• [Online operation]
Setting/monitoring tools for
the C Controller module
operation
• [Tool operation]
The service required for using the MELSEC data link
MELSEC data link function
function.
SD memory card access The service to access the SD memory card
SD memory card script The service required to execute the script file
execution (STARTUP.CMD) stored on the SD memory card
*1
The service to access the CompactFlash card
CF card access
The service required to execute the script file
*1
CF card script execution
(STARTUP.CMD) stored on the CompactFlash card
The service required to boot the parameter file stored on
*1
CF card parameter boot
the CompactFlash card
Telnet The service required to control the computer remotely
FTP The service required to use the file transfer function
WDB The service required to connect CW Workbench
Shell The service required to execute shell commands Vx Works
The service required to use the function for assigning
DHCP
network settings automatically
USB storage access The service required to access the USB memory
*1 : Change the service setting by using the parameter setting stored in the "Standard ROM". When changing the service, write to
"Standard ROM".
Description
Operations on C Controller module (reading/writing/
verifying/deleting data), battery backup RAM, watch
Intelligent function module tool, parameter initialization/
flash ROM data write request
CHAPTER 11 BASIC FUNCTIONS
Q24DHC-V Q24DHC-VG Q24DHC-LS
: Supported : Not supported
CPU module
Q24DHC
-V -VG -LS



Q26DHC-LS Q12DC-V
Q26DHC Q12DC
-LS -V

 




185
11