Switch Settings For I/O And Intelligent Function Modules - Mitsubishi Electric MELSEC Q Series User Manual

(2) Function
In the table below, functions used for I/O modules and intelligent function modules are listed.
Function name
QBF_X_In_BitEx
QBF_X_In_WordEx
QBF_Y_Out_BitEx
QBF_Y_Out_WordEx
QBF_Y_In_BitEx
QBF_Y_In_WordEx
QBF_ToBuf
QBF_FromBuf
mdSendEx
mdReceiveEx
mdRandWEx
mdRandREx
mdDevSetEx
mdDevRstEx
*1 : Access is not allowed to the shared CPU memory.
11.1.2

Switch settings for I/O and intelligent function modules

This function allows to set contents of the intelligent function module and interrupt module switches by Setting/
monitoring tools for the C Controller module.
(1) Setting method
For this setting, use the following functions in Setting/monitoring tools for the C Controller module.
1.
Project view  "Parameter"  "CCPU Parameter"  <<I/O assignment settings>>
2.
Set "Intelligent" in "Type" from "I/O Assignment".
3.
Configure "Switch Setting".
For setting contents, refer to the manuals for the respective intelligent function module and interrupt module.
(2) Precautions
The Switch Setting is active after writing by Setting/monitoring tools for the C Controller module in either of the
following situations.
• The C Controller system is powered on.
• The C Controller module is reset.
Reads out input signals (X) in bit (1 point).
Reads out input signals (X) in word (16 points).
Outputs output signals (Y) in bit (1 point).
Outputs output signals (Y) in word (16 points).
Reads out output signals (Y) in bit (1 point).
Reads out output signals (Y) in word (16 points).
Writes data to the CPU shared memory of the specified module and the buffer memory of
the intelligent function module (To instruction).
Reads data from the CPU shared memory of the specified module and the buffer memory
of the intelligent function module (From instruction).
Batch writes devices.
Batch reads devices.
*1
Writes devices randomly.
*1
Reads devices randomly.
*1
Set the bit device (to ON).
*1
Reset the bit device (to OFF).
Q24DHC-V
CHAPTER 11 BASIC FUNCTIONS
Function
Q24DHC-VG Q24DHC-LS Q26DHC-LS
11
Q12DC-V
147