Changing E-Mail Settings - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

Commissioning the device
4.4 Configuring the device
4.4.12.5

Changing e-mail settings

Requirement
The Control Panel is open.
Note
Additional tabs may appear in the "WinCC Internet Settings" dialog. This depends on the
options that have been enabled for network operation in the project. For more information,
please refer to the WinCC or WinCC flexible Online Help.
Procedure
Proceed as follows:
1. Open the "WinCC Internet Settings" dialog with the icon of the same name.
2. Open the "Email" tab.
3. Specify the SMTP server:
4. Enter information about the e-mail account:
124
– Select "Use the default of the project file" if you want to use the SMTP server defined
in the project.
– Select the empty box and enter the desired SMTP server if you do not want to use the
SMTP server configured in the project.
– Enter the name for the sender under "Sender".
– Enter the e-mail account for sending your e-mail under "Authentication".
Some e-mail providers only allow you to send mail if you specify the e-mail account.
The "Authentication" text box can remain empty if your e-mail provider allows you to
send mail without checking the account.
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels