Siemens SIMATIC KP400 Comfort Operating Instructions Manual page 20

Overview
1.3 Configuration of the devices
Interfaces for the 7", 9" and 12" models
The figure below shows the interfaces for the following HMI devices:
● KP700 and TP700 Comfort
● KP900 and TP900 Comfort
● KP1200 and TP1200 Comfort
Interfaces for the 15", 19" and 22" models
The figure below shows the interfaces for the following HMI devices:
● KP1500 and TP1500 Comfort
● TP1900
● TP2200 Comfort
Further information
Use the X1 or X60 interface to connect a configuration PC. Use the X61 / X62 interfaces to
connect peripheral devices such as a printer or keyboard. Use the X90 interface to connect a
loudspeaker.
You can affix the USB and PROFINET connecting cables to the rear panel of the HMI device
with cable ties.
With the 4" and 7" models, protect the cables with a separate strain relief. Attach the strain
relief to the HMI device.
See also
Description of the ports (Page 205)
20
①
X80 power supply connector
②
Connection for equipotential bonding (ground)
③
X2 PROFIBUS (Sub-D RS422/485)
④
X61 / X62 USB type A
①
X80 power supply connector
②
Connection for equipotential bonding (ground)
③
X2 PROFIBUS (Sub-D RS422/485)
④
X3 PROFINET (LAN), 10/100/1000 Mb
⑤
X1 PROFINET (LAN), 10/100 Mb
⑥
X90 Audio Line IN / OUT
⑦
X60 USB type Mini B
⑤
X1 PROFINET (LAN), 10/100 Mb
⑥
X61 / X62 USB type A
⑦
X90 Audio Line IN / OUT
⑧
X60 USB type Mini B
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels