Changing User Language - Siemens 670 V2 Operating Instructions Manual

Operating and parametrizing
8.3 Additional drivers and applications
Figure 8-16
Procedure
1. Start the "Multilanguage User Interface".
2. Activate the desired languages in the upper field.
3. Select the desired standard language from the lower field.
4. Close the dialog with the "OK" button. The changes become effective when the user logs
8.3.12

Changing user language

Introduction
The display of date, time, cash amount, and decimal point are language-specific. Using the
relevant standard language, foreign text will be displayed in the respective native language if
the application supports the standard language.
Applications have language-specific dialogs. Using the relevant system language, foreign
text in dialogs will be displayed in the respective native language if the application supports
the system language.
8-20
Multilanguage File Installation
off, logs back on, or initiates a restart.
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
Panel PC 670 V2/870 V2, Control unit