Bios Setup Default Settings - Siemens SIMATIC Panel PC 870 Equipment Manual

Configuring the Computing Unit in BIOS Setup
5.9

BIOS Setup Default Settings

Documenting the device configuration
If you have made any modifications to the default Setup settings, enter them in
the following table. Refer to these entries if any hardware modifications are
necessary later.
Note
Print the following table and keep the pages in a safe place after filling the entries.
System Parameters
Main
System Time
System Date
Diskette A
Primary Master
Primary Slave
Secondary Master
Secondary Slave
Boot Options
Quick Boot Mode
SETUP prompt
POST Errors
Floppy check
Summary screen
Keyboard Features
Num Lock
Key Click
Keyboard auto-repeat rate:
Keyboard auto-repeat delay
Hardware Options
PCI - MPI / DP:
On Board Ethernet
Ethernet Address
LAN Remote Boot
Legacy USB Support
SafeCard Functions
Fan Control
CRT / LCD selection
LCD Screensize
5-26
Default Settings
hh:mm:ss
MM/DD/YYYY
1.44 MB, 31/2 "
C: 6495 MB
None
None
None
Enabled
Enabled
Enabled
Disabled
Enabled
On
Disabled
30/s
1/2s
Enabled
Enabled
08000624xxxx
Enabled
Disabled
Enabled
Enabled
SIMULTAN
Graph&Text Expanded
SIMATIC Panel PC 870 Computing Unit, Equipment Manual
Release 11/02
Your Entries