Siemens SIMATIC KP400 Comfort Operating Instructions Manual page 4

Preface
Trademarks
The following designations marked with the symbol ® are registered trademarks of
Siemens AG:
● HMI
● SIMATIC
● WinCC
Style conventions
Style Convention
"Add screen"
"File > Edit"
<F1>, <Alt+P>
Please observe notes labeled as follows:
Note
A note contains important information about the product described in the manual and its use,
or a specific section of the manual to which you should pay particular attention.
4
CAUTION
Manual belongs to HMI device
The supplied manual belongs to the HMI device and is also required to repeat
commissioning. Keep all supplied and supplementary documentation for the entire
service life of the HMI device.
Provide all stored documents to subsequent owners of the HMI device.
®
®
®
Scope
Terminology that appears in the user interface, for example,

dialog names, tabs, buttons, menu commands
Required input, for example, limits, tag values.

Path information

Operational sequences, for example, menu commands, shortcut
menu commands.
Keyboard operation
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels