Siemens SIMATIC KP400 Comfort Operating Instructions Manual page 57

Slots for memory and system memory card
The slots for memory card and system memory card are on the back of the enclosure for the
7" models. The memory cards and system memory cards are thus accessible at the rear of
the cabinet. The memory cards and system memory cards are protected by a safety lock.
The memory cards and system memory cards can be hot-swapped during ongoing operation
of the HMI device.
The slots are on the back of the enclosure for the 4" models.
The following figure shows the slots with safety lock:
①
②
③
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
Slot for memory card in the "SD(IO / HC)" or "MMC" format.
Recommendation: SIMATIC HMI memory card
Slot for the system memory card.
Permissible: SIMATIC HMI Memory Card ≥ 2 GB
Safety lock
KP400 Comfort and KTP400 Comfort: infinitely variable
KP700 Comfort and TP700 Comfort and higher: two-level
Commissioning the device
4.1 Overview
57