Changing Regional Settings - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

See also
Reference for functions (Page 79)
Synchronizing the time via the time server (Page 111)
4.4.4.2

Changing regional settings

In different countries, for example, the date, time and decimal points are displayed
differently. You can adjust this display to meet the requirements of different regions.
The country-specific settings apply to the current project. If the project language is changed,
the country-specific settings are also changed.
Requirement
The Control Panel is open.
Procedure
Proceed as follows:
1. Open the "Regional and Language Settings" dialog with the Regional Settings icon.
2. Open to the "Regional Settings" tab.
3. Select the region.
4. Open the "Number", "Currency", "Time" and "Date" tabs and make desired settings for
5. Confirm your entries with "OK".
Result
The HMI device's regional settings have been changed.
See also
Reference for functions (Page 79)
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
the region.
Commissioning the device
4.4 Configuring the device
89