Conventional Aspiration smoke detector
Turning the detection module in the
cover of the FCS-320-TM detection unit
Installation material
Cylinder or flat head screws
–
–
Bore distances
The distances of the borings for securing the FCS-320-TM are shown in the figure below.
Bosch Sicherheitssysteme GmbH
1
1
Maximum thread diameter: 4 mm
Head diameter: max. 8 mm
Installing the Aspiration smoke detector | en
1
Screws
Operation guide
53
2020.04 | 2.1 | F.01U.130.928