How To Set The Redundancy Of The Route Control Servers; How To Download The Target Systems For Route Control - Siemens SIMATIC PCS 7 Function Manual

4. Select the connection path through which the Route Control server pair is connected in the
drop-down list.
– For connection via RJ45 cable:
– For a serial connection:
5. Click "OK".
4.7.6

How to set the redundancy of the Route Control servers

Introduction
You only have to configure the PC stations in the SIMATIC Manager for redundant Route
Control servers.
In the object properties of the PC station, the computer name must be configured or "Computer
name identical to PC station name" the check box must be activated.
Additional information
● Section "How to configure a Route Control server and its redundant Route Control partner
server (Page 169)"
4.7.7

How to download the target systems for Route Control

Introduction
For Route Control plants with redundant Route Control servers, you should always download
the Route Control configuration to the Route Control server and the Route Control clients.
Additional information
● You can find information about downloading the Route Control server in the manual
Control System PCS 7; SIMATIC Route Control .
● You can find information about downloading the configuration to the Route Control client
in the manual
Fault-tolerant Process Control Systems (V8.1)
Function Manual, 11/2014, A5E34878832-AA
In the "Network adapter" drop-down list, select the network adapter to which you want
to attach the network cable for the redundant connection between the two PC stations
of a server pair.
In the "Serial port" drop-down list, select the port to which you want to attach the null-
modem cable for the redundant connection between the two PC stations of a server
pair: "COM1" or "COM2"
Process Control System PCS 7; SIMATIC Route Control .
Advantages of fault-tolerant components
4.7 SIMATIC Route Control stations
Process
177