Sony CCP-8000 Series User Manual page 361

You can adjust the parameters selected with these buttons using the control
knobs, when the button is lit green.
• When border is selected
Knob
1
2
3
4
• When soft border is selected
Knob
1
2
Knob
1
2
3
Buttons for positioning the DME wipe pattern
POS (position): Adjusts the position of the DME wipe pattern.
CNTR (center): Returns the DME wipe pattern position to the center.
When you press the [POS] button, the alphanumeric display first shows the
name of the parameter, "H" or "V," and then the value of the parameter.
When the [POS] button is lit green, you can adjust the position of the pattern
with the control knobs.
Knob
1
2
3
4
360
DME Wipe Pattern Operations in the Multifunction Flexi Pad Control Block
Parameter Adjustment
W Border width
L Luminance
S Saturation
H Hue
Parameter group [1/2]
Parameter Adjustment
W Border width
I Degree of softening of
inside of border
Parameter group [2/2]
Parameter Adjustment
L Luminance
S Saturation
H Hue
Parameter Adjustment
H Horizontal position
V Vertical position
H (R) Relative horizontal
movement
V (R) Relative vertical movement
Setting values
0 to 100
0 to 100
0 to 100
0 to 359
Setting values
0 to 100
0 to 100
Setting values
0 to 100
0 to 100
0 to 359
Setting values
–200 to +200
–200 to +200
–400 to +400
–400 to +400