Basic Procedure For Dme Wipe Settings; Dme Wipe Settings Menu; Dme Wipe Pattern Selection - Sony CCP-8000 Series User Manual

Basic Procedure for DME Wipe Settings

You carry out DME wipe setting operations principally using the DME Wipe
menu for each bank.
This section describes the basic procedures for DME wipe settings, taking the
M/E-1 >DME Wipe menu as an example.
For details of independent key transition DME wipe settings, see "DME Wipe
Settings for Independent Key Transitions" (page 345).
For details of resizer DME wipe (for MVS-8000G only), see page 349.
Notes
For one M/E bank, DME effects (including external processed keys) can be
used in up to two places on the DME dedicated interface and in only one place
on the SDI interface simultaneously.
When combining the SDI interface with the dedicated interface, you can apply
DME effects to a maximum of three keys. (Requires a setting in setup.)

DME Wipe Settings Menu

Accessing the DME Wipe menu
To access the M/E-1 >DME Wipe menu, use either of the following operations.
• In the menu control block, select the top menu selection button [M/E 1], and
press VF6 'DME Wipe.'
• In the transition control block of the M/E-1 bank, press the transition type
selection button [DME] twice in rapid succession.
Either of the above operations displays the M/E-1 >DME Wipe menu.

DME Wipe Pattern Selection

Selecting a DME wipe pattern by a menu operation
1
334
Basic Procedure for DME Wipe Settings
In the M/E-1 >DME Wipe menu, select HF1 '1ch' for one-channel mode,
HF2 '2ch' for two-channel mode or HF3 '3ch' for three-channel mode.