Sony CCP-8000 Series User Manual page 254

[DROP BDR] button: Applies a drop border to the edge.
[SHDW] button: Applies a shadow to the edge.
For parameters that can be adjusted with the adjustment knobs, see "Key Edge
Modifications" (page 218).
Setting the degree of edge softening
[SOFT EDGE] button: Softens the key edge.
For parameters that can be adjusted with the adjustment knobs, see step 7 in
"Key Edge Modifications" (page 221).
Enabling the set key to be used on the AUX bus
[PROC KEY] button: This enables the keyer key fill/key source signal to be
subjected to key processing, then used as a reentry signal by selection on
the AUX bus.
For details, see "Using an external processed key" (page 245).
Sending a signal subjected to key processing to frame memory
[FM FEED] button: Press this to assign the key fill/key source signal
processed on the currently selected keyer to frame memory source 1 or 2.
For details, see "Using a frame memory feed" (page 246).
Using a DME currently used on another keyer
[OVER RIDE] button: When one DME channel is in use, holding down this
button and pressing a DME channel button ([DME1] to [DME8]) allows
you to forcibly select this channel. The button for the selected DME
channel lights green.
Recalling the keyer using the DME channel
[TRCE] button: Holding down this button, press the selection button for the
DME channel already assigned to another keyer or transition, to switch the
keyer or transition to which the DME channel is assigned to the currently
selected state.
Monitoring DME output
[DME MON] button: Holding down this button and pressing the selection
button for a DME channel ([DME1] to [DME8]) allows you to monitor the
signal for this channel as a reentry signal to DME MON V/K.
Key Adjustment Operations With the Multifunction Flexi Pad Control Block
253