Sony CCP-8000 Series User Manual page 220

a) In the "4H mode" and when [Fine Key] (page 221) is on, the setting value range is 0.00
to 4.00.
b) When a wipe pattern key or key wipe pattern key is selected as the key type
• Separate edge on
The left, right, top, and bottom border or outline widths can be adjusted
independently. The separate edge function is only valid when a
luminance key, linear key, or chroma key is selected as the key type.
Knob Parameter Adjustment
1 Top Top edge width
2 Left Left edge width
3 Right Right edge width
4 Bottom Bottom edge width
5 Density Density
a) In the "4H mode" and when [Fine Key] (page 221) is on, the setting value range is 0.00
to 4.00.
When drop border or shadow is selected: The setting parameter values
depend on the on/off setting of key drop and the selection of 4H mode/
8H mode (see page 199).
• "Key drop OFF" mode
Knob Parameter Adjustment
1 Width Width
2 Position Position
3 Density Density
• "Key drop ON" mode
Knob Parameter Adjustment
1 Width Width
2 Position Position
3 Density Density
a) In the "4H mode" and when [Fine Key] (page 221) is on, the setting value range is 0.00
to 4.00.
When emboss is selected:
Knob Parameter Adjustment
1 Width Width
2 Position Position
Setting values
0.00 to 8.00
0.00 to 8.00
0.00 to 8.00
0.00 to 8.00
0.00 to 100.00
Setting values
0.00 to 8.00
359.99 to 180.00
0.00 to 100.00
Setting values
0.00 to 8.00
359.99 to 0.00
0.00 to 100.00
Setting values
0.00 to 4.00
359.99 to 0.00
Key Setting Operations Using Menus
a)
a)
a)
a)
a)
a)
219