Numeric Keypad Control Block - Sony CCP-8000 Series User Manual

through the keyframes in the specified
range.
f PAUSE button
When this button is pressed, a pause is
applied to the selected keyframe.
When editing a macro, press this button,
turning it on, to include a pause event in the
macro. The pause length can be set in the

numeric keypad control block.

g Effect execution section
RUN: When this button is pressed, the
effect is run from the first keyframe to
the last keyframe. However, if a pause
is set on a keyframe, the effect stops at
that point. Press this button again to
resume execution, and continue to the
next pause point or the end of the
effect.
Effect indicator: This comprises multiple
LEDs, which show the progress of the
effect.
Fader lever: Moving this up or down
manually runs the effect.
REWIND: When this button is pressed, the
currently recalled effect is rewound to
the first keyframe.
FF (fast forward): When this button is
pressed, the currently recalled effect is
advanced to the last keyframe.
Numeric Keypad Control Block
The numeric keypad control block is used
for region selection, for saving and
recalling snapshots, effects and shotboxes,
for entering numeric values for trackball
operation and keyframe operation, and for
transition rate entry.
h Effect execution direction selection
buttons
NORM (normal): When this button is lit,
effect execution runs from the first
keyframe to the last keyframe.
REV (reverse): When this button is lit,
effect execution runs from the last
keyframe to the first keyframe.
Pressing one of these buttons automatically
turns the other off.
NORM/REV (normal/reverse): Press this
button, turning it on, to reverse the
direction of the effect when it reaches
the last keyframe or first keyframe.
i STOP NEXT KF (stop next
keyframe) button
When this button is pressed, turning it on,
the effect execution range is from the
current time to the next keyframe.
j EFF LOOP (effect loop) button
When the effect reaches the last keyframe
with this button on, it returns to the first
keyframe and repeats.
k AUTO INS (auto insert) button
When editing a macro, press this button,
turning it on, to enable the auto insert
function, so that every control panel
operation you carry out is added to the
macro as an event.
Names and Functions of Parts of the Control Panel
73