Sony CCP-8000 Series User Manual page 222

6
When emboss is selected for the edge type, adjust the color in the <Emboss
Fill> group.
To adjust matte 1 press [Matte1], and to adjust matte 2 press [Matte2], then
adjust the following parameters.
Knob Parameter
1 Luminance
2 Saturation
3 Hue
7
To make the edge soft, press [Soft Edge] to set it on, and adjust the
softness.
Knob Parameter
1 Soft
For a normal edge, when [Soft Edge] is enabled, [Key Drop] is kept on.
8
To make separate fine adjustments to the positions of the left, right, top,
and bottom of the source edge, press [Fine Key], to set it on, and adjust the
following parameters.
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
Knob Parameter
1 H Phase
2 V Phase
Notes
In the emboss function it is not possible to set [Fine Key] on.
• When the edge type is normal, drop border or shadow, enabling the [Fine
Key] function keeps [Key Drop] on.
Adjustment
Luminance
Saturation
Hue
Adjustment
Edge softness
Parameter group [1/2]
Adjustment
Key top edge position
Key left edge position
Key right edge position
Key bottom edge position
Parameter group [2/2]
Adjustment
Key horizontal position
Key vertical position
Key Setting Operations Using Menus
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
Setting values
–2.00 to +2.00
–2.00 to +2.00
–2.00 to +2.00
–2.00 to +2.00
Setting values
Left edge position
value shown
Top edge position
value shown
221