Table of Contents
Advertisement
Panel Operation
Checking the backup battery
Follow the steps below to check the internal backup battery
status:
1.
Press the [UTILITY] key to select the Utility
display.
The most recently used Utility display will appear.
2.
Press the [UTILITY], [NEXT] or [BACK] key
repeatedly until the Battery page appears.
BATTERY
[OK
The remaining battery charge is displayed as follows:
[OK
]
Plenty of charge
[Low Battery]
Charge is getting low.
Memory data may be lost. Or, no battery
[No Battery ]
is installed.
"Low Battery" or "No Battery" will appear when the
battery charge is getting low. In this case, save the data to
an external device (such as a computer) immediately, then
CAUTION
ask the Yamaha dealer to replace the backup battery.
H IN T
If there is any issue with the backup battery, the SP2060 displays
"Low Battery," "Critical Battery," or "No Battery" when you turn
on the power to the unit.
Displaying the firmware version
Follow the steps below to view the current firmware version
number:
1.
Press the [UTILITY] key to select the Utility
display.
The most recently used Utility display page will appear.
2.
Press the [UTILITY], [NEXT] or [BACK] key
repeatedly until the Version page appears.
The page indicates the current firmware version number.
VERSION
You can update the SP2060 firmware via DME Designer.
Refer to the DME Designer Owner's Manual for details.
You can also download the latest firmware from the follow-
ing Yamaha website.
http://www.yamahaproaudio.com/
]
[V1.00]
Initializing the SP2060
Follow the steps below to initialize the internal memory:
You can select one of the following initialization types:
* Initializing the current scene backup [CURRENT
BACKUP]
* Initializing all user settings (excluding the libraries) to
the factory settings [WITHOUT LIB.]
* Initializing all settings to the factory settings
[FACTORY SETUP]
When the internal memory is initialized, all data stored in
the memory will be lost. Use caution when you execute
CAUTION
this function.
1.
Turn off the power to the SP2060.
2.
Turn on the power to the SP2060 while
holding down the [BACK/STORE] key.
The Initialization display appears.
INITIALIZE
FACTORY SETUP
3.
Press the [▲INC]/[▼DEC] keys to select a
type of initialization.
NOT E
To cancel the initialization operation, select "Exit" and confirm
the cancellation. Alternatively, simply turn off the power to the
SP2060.
4.
Press the [NEXT] key to move the cursor to
the
icon, then press the [YES] key.
The Initialization operation starts. During initialization,
the following status message appears:
INITIALIZE
EXECUTING..
When initialization is completed, the SP2060 displays
the following status message, then automatically restarts.
INITIALIZE
COMPLETED!
SP2060 Owner's Manual
35
Advertisement
Table of Contents
