User Lock; Setting The Last Memory Resume - Yamaha SP2060 Owner's Manual

Panel Operation
6.
To confirm the operation, press the [YES] key.
The flashing "ON" (or "OFF") lights up steadily, and the
cursor returns to the "ON (or OFF)" position.
INPUT A/B LINK
ARE YOU SURE?
To cancel the operation and return to the original set-
ting, press the [NO] key.
NOT E
If you set INPUT A/B LINK to "ON," the linked parameters for
channel A will be copied to channel B parameters.

User Lock

Parameter settings can be "locked" temporarily to prevent
accidental mis-operation. This function is useful to avoid
unintentional operations or to prevent others from operating
the panel controls.
The following operations are the User Lock target.
* Editing the parameters
* Recalling and storing a scene
* Changing a scene title
* Changing the scene protection status
* Recalling a library
NOT E
• You can mute or unmute, or cancel User Lock even if the User
Lock function is turned on.
• The User Lock function is effective only for the panel controls
on the SP2060, and does not affect any control signals from
external devices.
1.
Press the [UTILITY] key to select the Utility
display.
The most recently used Utility display will appear.
2.
Press the [UTILITY], [NEXT] or [BACK] key
repeatedly until the User Lock page appears.
USER LOCK
OFF
3.
Press the [▲INC] key to turn User Lock on. To
cancel User Lock, press the [▼DEC] key.
"ON" flashes on the screen.
USER LOCK
ON
4.
Press the [NEXT] key to move the cursor to
the icon.
USER LOCK
ON
5.
Press the [YES] key.
A confirmation message will appear.
USER LOCK
ARE YOU SURE?
6.
To confirm the operation, press the [YES] key.
A status message appears, and User Lock becomes active.
Panel Locked
H IN T
• A short cut to turn on the User Lock function is to hold down
the [MUTE] key for two seconds or longer.
• A short cut to turn off the User Lock function is to hold down
the [MUTE] key for two seconds or longer.

Setting the Last Memory Resume

You can select whether at the startup the SP2060 recalls the
scene selected before you turned off the power to the device,
or it starts up with the same status as when it was shut down
last time. The default setting is "ON."
OFF: At the startup, the SP2060 will recall the scene select-
ed before you turned off the power to the device.
ON: The SP2060 will start up with the same status as
when it was shut down last time.
1.
Press the [UTILITY] key to select the Utility
display.
The most recently used Utility display will appear.
2.
Press the [UTILITY], [NEXT] or [BACK] key
repeatedly until the Last Memory Resume
page appears.
LAST MEM. RESUME
ON
SP2060 Owner's Manual
33