Library; Displaying The Current Library; Recalling A Library; Adjustgc (Adjustable Gc) - Yamaha SP2060 Owner's Manual

Panel Operation
NO T E
• The type names are abbreviated on the SP2060 screen.
For example, "24dB/Oct Bessel" is displayed as "24Bessel."
• Gc page is displayed if you select "Adjust Gc" for the Type
parameter.
• Thru
No filter is applied. The original characteristics are kept
with no attenuation for all frequency ranges.

• AdjustGc (Adjustable Gc)

Filters with an Adjustable Gc enable you to adjust the gain
at the cutoff frequency in the range of –6dB through
+6dB. With Gc set to –3dB, the filter is practically a But-
terworth filter. And with Gc set to –6dB, the filter is prac-
tically a Linkwitz-Riley filter.

• Butrwrth (Butterworth)

This filter is the most common type of filter. It has a flat
pass band and a –3dB gain at the cutoff frequency.
• Bessel
This filter focuses on the phase characteristics. Although it
has a more gradual roll-off than a Butterworth filter, it will
pass a square wave without causing ringing.

• Linkwitz (Linkwitz-Riley)

This filter features the square of the second order. When
the output signal from its LPF and HPF are combined, the
gain over the entire range is +/–0dB. It has a flat pass band
and a –6dB gain at the cutoff frequency.
28
SP2060 Owner's Manual

LIBRARY

Using libraries facilitates the recall of optimal speaker set-
tings. Up to 60 libraries are available for each component via
the DME Designer application.

Displaying the current library

Pressing the [X-OVER] key repeatedly will select the Cur-
rent Library display, Library List display, or X-Over display,
in this order.
The title of the library most recently recalled for each com-
ponent will be displayed.
CURRENT LIBRARY
IF2112/95
N OTE
Libraries cannot be displayed or recalled for Input channels. If
you press an Input channel [SEL] key, a message appears.

Recalling a library

Follow the steps below to recall a library:
1.
Press the [X-OVER] key repeatedly until the
Library List display appears on the screen.
LIBRARY LIST
IF2112/64
2.
Press the [SEL] key of an Output channel for
a component for which you wish to recall a
library.
3.
Press the [▲INC]/[▼DEC] keys to select a
library.
LIBRARY LIST
IF2112/64
4.
Press the [NEXT/RECALL] key.
A confirmation message will appear.
LIBRARY RECALL
ARE YOU SURE?