Table of Contents
Advertisement
Panel Operation
5.
Press the [NEXT] key repeatedly to move the
cursor to the
key.
A confirmation message will appear.
6.
To confirm the edit, press the [YES] key.
The unit reflects the edit and returns to the Scene Edit
display.
HINT
You can turn protection on and off from the DME Designer
application.
Deleting a scene
Follow the steps below to delete a scene:
1.
Press the [SCENE] key repeatedly until the
Scene Delete display appears on the screen.
2.
Press the [▲INC]/[▼DEC] keys to select a
scene to delete.
3.
Press the [NEXT] key to move the cursor to
the
icon, then press the [YES] key.
A confirmation message will appear.
4.
To confirm the operation, press the [YES] key.
The operation is executed and the unit returns to the
Scene Delete display.
NO T E
You cannot delete preset scenes, protected scenes, and current
scene.
32
SP2060 Owner's Manual
icon, then press the [YES]
SCENE EDIT
ARE YOU SURE?
SCENE DELETE
72:FOH(Event A)
SCENE DELETE
ARE YOU SURE?
UTILITY
The Utility function enables you to view the word clock sta-
tus and make network settings. See page 37 for more infor-
mation on making network settings.
INPUT A/B LINK
Follow the steps below to link the Input channel A and B pa-
rameters:
When INPUT A/B LINK is turned On, the parameters for
channel A and B are linked and set to the same value auto-
matically.
N OTE
The channel SUM parameters cannot be linked.
The following components will be linked:
• INPUT LEVEL
• INPUT EQ
• INPUT DELAY
1.
Press the [UTILITY] key to select the Utility
display.
The most recently used Utility display will appear.
2.
Press the [UTILITY], [NEXT] or [BACK] key
repeatedly until the INPUT A/B LINK page
appears.
INPUT A/B LINK
OFF
3.
Press the [▲INC] key to link the parameters.
"ON" flashes on the screen.
INPUT A/B LINK
ON
4.
Press the [NEXT] key to move the cursor to
the
icon.
INPUT A/B LINK
ON
5.
Press the [YES] key.
A confirmation message will appear.
INPUT A/B LINK
ARE YOU SURE?
Advertisement
Table of Contents
