Storing A Scene; Changing A Scene Title; Protecting A Scene - Yamaha SP2060 Owner's Manual

Yamaha speaker processor owner's manual
Hide thumbs Also See for SP2060:
Table of Contents

Advertisement

Panel Operation

Storing a scene

Follow the steps below to store a scene (13–99) to the user
area:
H IN T
You can also store a scene using the DME Designer application.
1.
Press the [SCENE] key to select the Scene
Selection display.
25:FOH(Event A)
[2x(2way+SUB)L]
2.
Press the [▲INC]/[▼DEC] keys to select a
scene number.
3.
Press the [BACK/STORE] key.
A confirmation message will appear.
72:STORE
ARE YOU SURE?
4.
Press the [YES] key.
The scene is stored and its number becomes the current
scene number.
To cancel the store operation, press the [NO] key, in-
stead of the [YES] key. The unit returns to the Scene Se-
lection display.

Changing a scene title

Follow the steps below to change the title (up to 13 charac-
ters) of the scene stored for the current scene number:
NOT E
You cannot change the title of any protected User scenes.
1.
Press the [SCENE] key repeatedly until the
Scene Edit display appears on the screen.
SCENE EDIT
73:FOH(Event A)
2.
Press the [BACK]/[NEXT] keys to move the
cursor to a character you want to edit.
SCENE EDIT
73:FOH(Event A)
3.
Press the [▲INC]/[▼DEC] keys to change the
character.
H IN T
Holding down the [▲INC]/[▼DEC] keys will increase the speed
at which the characters scroll.
4.
When you finish editing the title, press the
[NEXT] key repeatedly to move the cursor to
the
icon, then press the [YES] key.
A confirmation message will appear.
SCENE EDIT
ARE YOU SURE?
5.
To confirm the edit, press the [YES] key.
The title is changed and the unit returns to the Scene
Edit display.

Protecting a scene

Follow the steps below to protect a scene:
1.
Press the [SCENE] key repeatedly until the
Scene Edit display appears on the screen.
SCENE EDIT
73:FOH(Event A)
2.
Press the [▲INC]/[▼DEC] keys to select a
scene number.
3.
Press the [NEXT] key to move the cursor to
the scene property icon.
SCENE EDIT
73:FOH(Event A)
4.
Press the [▲INC]/[▼DEC] keys to turn
protection on or off.
The protection icon flashes.
SCENE EDIT
73 FOH(Event A)
SP2060 Owner's Manual
31

Advertisement

Table of Contents
loading

Table of Contents