System Setup Menu - Raymarine E Series User Reference Handbook

21.4 System setup menu

The following table describes the various options in the System Setup menu for your multifunction display.
Menu item
Boat Details
Position Mode
TD Setup
Simulator
Simulator Speed
Customizing your display
Description
The accurate operation of the collision alarm is dependent on
you supplying suitable values for the Boat Details setting. You
should specify the minimum safe depth, beam, and height for
your vessel. The values you specify MUST be appropriate for
safe navigation, and must also take into account the position of
the GPS antenna on your vessel, as the collision alarm uses
data from the GPS antenna.
Determines how positioning data is displayed — as Latitude /
Longitude coordinates, or Loran TDs.
When the Position Mode (see above) is set to TDs, you can
specify the chain identifier, slave, and ASF values.
Enables or disables simulator mode, which allows you to practice
operating your multifunction display without data from a GPS
antenna, fishfinder (DSM sonar), or any other external unit.
Enables you to specify the speed at which the vessel icon will
move when the Simulator mode is enabled (see above).
Options
• Minimum Safe Depth
• Minimum Safe Beam
• Minimum Safe Height
• Lat / Long (default)
• TDs
Chain
• Various options, depending on cartography.
Slave 1/2
• Various options, depending on cartography.
ASF 1/2
• –09.9 to +09.9
• OFF (default)
• ON
• DEMO
• 1x
• 2x
• 3x
245