Gps Setup - Raymarine E Series User Reference Handbook

i. With the Databar Setup Menu displayed, select the
Configure menu item.
A red border will appear in the databar, identifying the
currently selected item.
ii. Select the MOVE DATA softkey.
iii. Using the trackpad, move the item of data to the desired
position in the databar.
iv. Press the OK button.
4. To remove a data item from the databar:
i. With the Databar Setup Menu displayed, select the
Configure menu item.
A red border will appear in the databar, identifying the
currently selected item.
ii. Using the trackpad, highlight the data item that you want to
remove.
iii. Select the REMOVE DATA softkey.
Customizing your display

21.3 GPS setup

The GPS setup options enable you to configure a connected GPS
receiver.
The Global Positioning System (GPS) is used to position your
vessel on the chart. You can set up your GPS receiver and check
its status from the GPS Status option in the Setup Menu. For each
tracked satellite, this screen provides the following information:
• Satellite number.
• Signal strength bar.
• Status.
• Azimuth angle.
• elevation angle.
• A sky-view to show the position of tracked satellites.
243