Tracks - Raymarine E Series User Reference Handbook

3. Move the cursor so that it stretches the leg of the route to the
desired position on the chart.
4. Select the PLACE WAYPOINT softkey.
Reversing a route
In the chart application:
1. Ensure that you are not following a route (press the STOP
FOLLOW softkey to stop following a route).
2. Position the cursor over the appropriate route.
3. Press the REVERSE ROUTE softkey.
The waypoints in the route are renumbered, and the route name
is moved.
Showing or hiding a route
In the chart application:
1. Using the trackpad, position the cursor over the appropriate
route.
2. Press the HIDE ROUTE softkey.
Adjusting the thickness of route lines
In the chart application:
1. Press the MENU button.
2. Using the trackpad, select the Chart Setup option.
3. Using the trackpad, select the Route Width menu item.
4. Using the trackpad, select the appropriate route line thickness.
5. Press the OK button.
66

5.3 Tracks

A track is an on-screen trail that shows the route you have taken.
This trail is made up of a series of track points which are created
automatically. You can save the track to create a permanent record
of where you have been
With tracks you can:
• Review where you have been.
• Create a route from a track.
Creating a track
In the chart application:
1. Select the NAVIGATION softkey.
2. Select the START TRACK softkey.
As you navigate your vessel, your journey is automatically recorded
as a track.
Note: If the power fails whilst a track is being recorded or the
position fix is lost, a break will occur in the track. Only the last
segment of a track can be converted into a route.
E-Series Widescreen User reference