Changing What The Engine Application Displays - Raymarine E Series User Reference Handbook

13.6 Changing what the engine
application displays
In the engine application:
1. Press the MENU button.
2. Select Panel Setup Menu .
3. Select the appropriate Configure: menu item.
A red outline appears around the main data element in the
engine monitoring application.
4. Highlight the data element that you want to change.
5. Select the SELECT DATA softkey.
6. Select the appropriate data group.
7. Select the appropriate category, then select the appropriate
option.
The engine display will be updated to show the data that you
specified.
Note: You can also access the SELECT DATA softkey by
pressing and holding the physical softkey associated with the
data panel you want to customize (for example, NAVIGATION).
Renaming data panels
In the data or engine application:
1. Press the MENU button.
2. Select Panel Setup Menu.
3. Select the panel you want to rename (Configure...).
4. Select the RENAME PANEL softkey.
The on-screen keyboard is displayed.
5. Enter the new name for the data panel.
6. Select the on-screen keyboard's SAVE key.
196
Changing the size of data panels
In the data or engine application:
1. Press the MENU button.
2. Select Panel Setup Menu.
3. Select the data panel you want to resize (Configure...).
4. Select the MERGE CELLS softkey if you want to merge the
contents of the cell with an adjacent cell, resulting in a bigger cell.
5. Select the SPLIT CELL softkey if you want to split the size of
the cell in half.
E-Series Widescreen User reference