System Settings Menu - Raymarine e7 User Reference

Ground trip resets menu
This menu enables you to resets the chosen ground trip distance counter to zero.
Menu item
Ground Trip 1 Reset
Ground Trip 2 Reset
Ground Trip 3 Reset
Ground Trip 4 Reset

System settings menu

GPS setup
The GPS setup options enable you to configure a connected GPS
receiver.
The Global Positioning System (GPS) is used to position your vessel
on the chart. You can set up your GPS receiver and check its status
from the GPS Status option in the System Settings menu. For
each tracked satellite, the screen provides the following information:
• Satellite number.
• Signal strength bar.
• Status.
• Azimuth angle.
• Elevation angle.
• A sky-view to show the position of tracked satellites.
Customizing your display
Description
Resets the ground trip 1 distance counter to zero.
Resets the ground trip 2 distance counter to zero.
Resets the ground trip 3 distance counter to zero.
Resets the ground trip 4 distance counter to zero.
1
2
3
4
5
D12204-1
299