Displaying The Cdi Application; Using The Cdi Application - Raymarine E Series User Reference Handbook

11.2 Displaying the CDI application

With the home screen displayed:
1. Select a page that includes the CDI application.
The CDI application is displayed.
Note: If the CDI application is placed in multiple windows, the
same data is displayed in each.
Using the Course Deviation Indicator

11.3 Using the CDI application

Monitoring Your Course Using CDI
You can use the 'rolling road' format of the Course Deviation
Indicator (CDI) application to monitor your course.
The steering instructions below the rolling road tell you what
correction is needed to maintain your course and arrive at the target
waypoint.
The following table explains these instructions.
Instruction Cause
STEER XTE error to port is more than a 1/4 of the maximum
STARBOARD XTE error limit in the Setup menu.
STEER PORT XTE error to starboard is more than a 1/4 of the
maximum XTE error limit in the Setup menu
Indication arrows are placed either side of the steering instruction,
pointing towards the centre line. The greater the error the more
arrows appear. You should correct your course by steering in the
direction indicated by the arrows.
Following a route using the CDI application
1. In the CDI application, press the GOTO softkey.
2. Press the FOLLOW ROUTE OPTIONS softkey.
The Route List is displayed.
3. Using the trackpad, select the route that you want to follow.
4. Press the OK button.
Going to a waypoint using the CDI application
1. In the CDI application, press the GOTO softkey.
2. Press the GOTO WAYPOINT OPTIONS softkey.
The Waypoint List is displayed.
167