Alarms - Raymarine E Series User Reference Handbook

• MOB position data is displayed in the databar along the top of
the screen.
• Any chart settings that you make to the special MOB chart
application will not be saved.
When you cancel the MOB alarm, the special MOB chart application
is closed.
The normal chart application is reset to the same settings that it had
before the MOB alarm was raised.
Responding to a MOB alarm on the home screen
With the home screen and a MOB alert displayed:
1. Select the ACKNOWLEDGE softkey.
The alarm is silenced and a special MOB chart application is
displayed.
Using alarms and MOB functions

8.2 Alarms

Alarms alert you to a situation or hazard requiring your attention.
You can set up alarms to alert you to certain conditions, such as
collision warnings and temperature limits.
Alarms are raised by system functions, and also external equipment
connected to your multifunction display.
When an alarm sounds, a message dialog is displayed on your
multifunction display, and any networked displays. The dialog
explains the reason for the alarm.
You can configure the behaviour of the following system and
application alarms using the Alarms Setup Menu:
• System alarms.
• Navigation alarms.
• Radar alarms.
• Fishfinder alarms.
• AIS alarms.
Cancelling alarms
1. Press the ACKNOWLEDGE softkey.
Accessing the alarms setup menu
1. Press the MENU button.
2. Select Alarm Setup.
The Alarm Setup Menu is displayed.
3. Select the appropriate alarm category.
111