Camera Control - Raymarine E Series User Reference Handbook

Icon Description
Scene preset mode for identifying people or objects
in the water.
Rear-view mode — image is flipped horizontally.
Zoom setting: 2x zoom.
Zoom setting: 4x zoom.
Image paused.
Single active controller on network.
Multiple active controllers on network.
PC / laptop detected on network.
Using the thermal camera application

19.2 Camera control

Thermal camera standby
Standby mode can be used to temporarily suspend the thermal
camera's functions when the camera is not needed for a prolonged
period.
When in standby mode the camera:
• Does NOT provide a live video image.
• Moves the camera into its "stowed" (parked) position (lens facing
down into the camera base) to protect the camera optics.
• Engages its pan / tilt motors to hold the camera in place in rough
seas.
Note: The "stowed" (parked) position can be configured using the
camera's setup menu.
Enabling and disabling thermal camera standby
In the thermal camera application:
1. Select the OPTIONS softkey.
2. Use the CAMERA STANDBY softkey to select ON or OFF
option, as appropriate.
Note: You can also use any of the camera controls in the thermal
camera application to "wake" the camera from standby mode.
Panning, tilting, and zooming the thermal image
There are 2 ways of controlling the thermal camera using the
thermal application:
• Using the touchscreen and Range key.
• Using the UniControl and Range key.
You can pan and tilt the thermal camera using touch actions:
231