• Place a waypoint on your chart / radar to mark the sending
vessel's position.
• Select to GOTO the sending vessel's position.
Note: You will NOT receive any safety messages in Simulator
mode (Menu > System Setup > Simulator).
Displaying safety-critical AIS information
In the chart or radar application:
1. Move the cursor over the relevant AIS target.
2. Press the AIS DATA softkey until the ON option is highlighted.
3. Press the OK button.
Using AIS
10.10 AIS options
The AIS options are accessible in the chart application by pressing
the AIS OPTIONS > MARPA & AIS OPTIONS softkeys, or the radar
application by pressing the TARGET TRACKING > MARPA & AIS
OPTIONS softkeys.
Parameter
Description
Vector Length
The time period
specified for drawing
length of vectors.
Target History
Plots a target's previous
position at specified
intervals. The four
most recent position
points are displayed.
If True target vectors
are selected, the four
most recent vessel
position points are also
displayed.
Options
• 0.5 min
• 1 min
• 3 min
• 6 min
• 12 min
• 30 min
• 60 min
• OFF
• 0.5 min
• 1 min
• 3 min
• 6 min
157