Raymarine E Series User Reference Handbook page 53

Waypoint navigation
Navigating to the cursor position on the chart
In the chart application:
1. Position the cursor at the desired destination on the chart.
2. Select the NAVIGATION softkey.
3. Select the GOTO CURSOR softkey.
Navigating to a waypoint on the screen
In the chart or radar application:
Using waypoints, routes and tracks
1. Place the cursor over the waypoint.
The softkeys change to show the waypoint options.
2. Select the GOTO WAYPOINT softkey.
The required course heading to the waypoint is shown on the
screen.
Note: You can select the STOP GOTO softkey at any time to
cancel the action.
Navigating to a waypoint in the Waypoints List
1. Press the WPTS/MOB button, or select the Navigation softkey
in the chart window.
2. Select the GOTO WAYPOINT OPTIONS softkey.
3. Select the required waypoint from the list.
4. Select the GOTO WAYPOINT softkey.
Cancelling navigation to a waypoint
1. Press the WPTS/MOB button.
2. Select the GOTO WAYPOINT OPTIONS softkey.
3. Select the STOP GOTO softkey.
4. Alternatively, in the chart application, position the cursor over the
active waypoint, and select the STOP GOTO softkey.
Note: Once navigation is no longer active, the waypoint symbol
returns to its normal unboxed state, and the dashed line between
your vessel and the waypoint is removed.
Waypoint information
When you create a waypoint, the system assigns a number of pieces
of information regarding the location marked. You can view and edit
the details of any waypoint that has been created and stored.
The following information is assigned or captured for each waypoint:
53