The [From Disk] Button - Yamaha PortaTone PSR-6000 Owner's Manual

The [FROM DISK] Button

Press this button when you want to re-load a
previously saved file from floppy disk. The data
loaded is the same as that saved by the TO DISK
operation described above. When the [FROM DISK]
button is pressed one of the displays shown to the
right will appear, depending on the type of disk
currently in the drive:
If normal data is to be loaded, simply use any of
the LCD dials to select the file you want to load. The
size of each file in the file list will appear to the right
of the file name in kilobytes (approximate). If a style
disk is loaded the style data disk display will appear.
In this case use the left LCD dials to select either I/
A SET or CUSTOM STYLE data, then use the right
LCD dials to select the style or style group (A1—
A6, A7—A12, B1—B6, or B7—B12).
When the file has been specified, press the EX-
ECUTE LCD button to actually begin the load op-
eration — the "Are you sure? " confirmation
display will appear.
If you want to execute the load operation press
the YES LCD button (or press the NO LCD button
to cancel the operation). "Do not remove disk! "
will appear while the data is being loaded, and the
progress of the load operation will be indicated by a
bar graph at the bottom of the display.
NOTES
• The [FROM DISK] button allows all data in a file to be
loaded at once. To load individual data groups use the
FROM DISK function described on page 94.
• See page 111 for a list of error messages that may
appear during a disk load operation.
....................................................................................................................................................
DISK IN USE
RB EFFECT FROM TO
DISK DISK
F6: Disk
93