Troubleshooting - Yamaha PortaTone PSR-6000 Owner's Manual

Troubleshooting

Symptom
Noise is heard when the power is
turned on or off.
No sound.
The ABC chord does not change
even when a different chord is
played.
The disk lamp lights dimly.
The style list or voice list does not
appear even when a STYLE or
VOICE group button is pressed.
Some function menus cannot be
selected.
An intro, fill-in, or ending created
using the Custom Accompaniment
Programmer cannot be used.
Possible Cause/Solution
This is a normal result of the power surge that occurs when the unit is
turned on of off. No solution necessary.
The volume controls or foot controller are turned all the way down.
Set the volume controls and foot controller to a reasonable listening
level.
A pair of headphones is plugged into the PHONES jack. Unplug the
headphones.
MIDI local control is turned OFF. Turn MIDI local control ON.
Are you sure you're playing on the left-hand section of the keyboard?
You are using single-finger type fingering in the fingered mode, or vice-
versa. Use the correct type of chord fingering for the selected ABC mode.
The PSR-6000 is constantly checking for the presence of a disk. This is
not a problem.
The [LIST HOLD] button is engaged (its LED is lit). Press the [LIST
HOLD] button so that its indicator goes out, then try selecting a style or
voice (page 11).
The GM/DOC, Sequencer, or Custom Accomp. mode is engaged. All
function menus are available in the normal play mode.
PRESET/NO ASSIGN is selected for that intro/fill/ending in the I/F/E
display screen. Set to USER and try again (page 73).
113