Installing An Internal Hard Disk - Yamaha AW2816 Service Manual

INSTALLING AN INTERNAL HARD DISK

• Hard disks are precision devices. Do not subject
them to physical shock or static electricity, etc.
• Do not place a hard disk nearby devices that pro-
duce a strong magnetic field, or in locations of
extreme cold, heat, or moisture.
• Before you handle a hard disk, touch your hand to a
grounded metallic object to release any static
charge that may be present in your body or clothing.
If you fail to do so, static electricity may damage the
hard disk.
• Never attempt to disassemble a hard disk or apply
excessive force to it.
• In order to install the internal hard disk, you will
need to turn the AW2816 upside down. Please make
sure that your work surface is spacious enough.
• The AW2816 is shipped with four screws for attach-
ing a 2.5 inch hard disk, and four screws for attach-
ing a CD-RW drive, making a total of eight included
screws of the same type.
You will need the following items.
• The AW2816 itself
• A 2.5 inch IDE hard disk (sold separately) for
installation
• Four screws included with the AW2816 for
attaching the 2.5 inch hard disk
• A philips (+) screwdriver
• Work surface
Make sure that the power of the AW2816
is turned off. For safety's sake, disconnect
the power cable from the AC outlet.
Always switch off the power for the main unit and all
peripherals, unplug the power cord for the main unit
from the outlet, then disconnect the cables connect-
ing the main unit with the peripherals before starting
installation work.
Spread a soft cloth over your work surface,
and place magazines or books to support
the four corners of the AW2816 so that the
faders, keys, and other controllers on the
top panel will not be damaged. Then turn
the AW2816 face down.
AW2816
29