Seq. Track Ch; Multi Part - Yamaha PortaTone PSR-6000 Owner's Manual

(i.e. the RHYTHM RECEIVE channel).

SEQ. TRACK CH.

Individually sets the transmit channels for the
sequencer tracks.
Use the LCD dials — TR1 through TR7 to set the
transmit channels for the corresponding tracks.
These settings only apply when the normal play
mode is selected. Separate transmit channels can be
set for sequencer tracks 1 through 7 (the ACCOMP.
track does not transmit) so the PSR-6000 sequencer
can be used to drive an external multi-timbre tone
generator or multiple tone generators via the speci-
fied channels.
NOTES
• If basic, split, and or sequencer track transmit channels
are set to the same MIDI channel number, DUP will
appear below the channel number. If the basic and split
transmit channels are set to the same number, the data
from both the left- and right-hand sections of the
keyboard will be transmitted on the basic transmit
channel (the content of the data to be transmitted can
be set via the "SPLIT SEND" function described on
page 108). Further, if several sequencer tracks are set
to transmit on the same channel, the data from all those
tracks will be transmitted on the same channel.
• As with the transmit channels described above, if the
basic, rhythm, and or multi part (described below)
receive channels are set to the same MIDI channel
number, DUP will appear below the channel number.
In this case the received data will apply to all voices
accessed by that channel number. If, for example, the
basic, rhythm, and multi part receive channel are all set
to the same number, any note data received on that
channel will play the orchestra 1, rhythm, and multi part
voices simultaneously.

MULTI PART

Allows the receive channel, volume, and voice
to be independently specified for 8 separate "parts"
to be controlled from an external MIDI device.
NOTES
• In the DOC mode MIDI reception occurs via channels
1 through 10, and channel 15 (rhythm part). In the GM
mode, reception occurs on all channels regardless of
these settings.
With the MULTI PART CH. parameters se-
lected, use the LCD dials — PART1 through PART8
— to set the MIDI receive channels of the corre-
F8: MIDI
105