Rename File - Yamaha PortaTone PSR-6000 Owner's Manual

3 RENAME FILE

Allows the name of the specified file to be
changed as required.
If the FILE LIST display shown above is not
showing, press the LIST LCD button to select it.
Use the any of the LCD dials to select the file you
want to rename. The name of the selected file is
displayed to the right of the file number, and the size
of the file appears to the right of the file name in
kilobytes (approximate). Press the NAME LCD
button to go to the name display.
File names can be up to 8 characters long. Use
the < > LCD dial to move the name cursor to the
various character positions, then use the A~Z or
0~9.. LCD dial to select the required character for
each position. The A~Z LCD dial selects capital
letters and the 0~9.. LCD dial selects numbers and
special characters.
When the file and file name have been specified,
press the EXECUTE LCD button to actually begin
the rename operation — the "Are you sure? "
confirmation display will appear.
If you want to execute the rename operation
press the YES LCD button (or press the NO LCD
button to cancel the operation). "Do not re-
move disk! " will appear while the file is being
renamed. You can go back to the file list by pressing
the LIST LCD button.
NOTES
• If you press the LIST LCD button to switch displays
after entering a file name and pressing the EXECUTE
LCD button, but before actually saving the name, the
new file name will be canceled.
• This function lets you change the name of a file without
having to re-load and then re-save the entire file with a
new name.
• Since the PSR-6000 uses the file number rather than
the file name to recognize and manage data files, a file
saved with the same number as another file will
overwrite that file even if it has a different name.
F6: Disk
97