Pitch Bend Wheel; Sustain Pedal - Yamaha PortaTone PSR-6000 Owner's Manual

NOTES
• This function can be used to apply modulation or the
selected effect to just one of the voices being played in
the split mode (ORCH. 2 v 1) to emphasize that voice
and provide greater contrast with the other voice.
• When EFFECT operation is selected, the wheel will
function only when the panel [EFFECT] button is
turned on.
• If AUTO BASS CHORD is on and the ORCH. 2 v 1
orchestration mode is selected, no modulation is ap-
plied to the ORCH. 2 voice.
SUSTAIN PEDAL & PITCH BEND WHEEL

SUSTAIN PEDAL

Determines whether the PSR-6000 sustain effect
is to be applied to the orchestra 1 voice, the orchestra
2 voice, or both orchestra voices.
Use the SUSTAIN PEDAL ORC2 LCD dial to
turn sustain on or off for the orchestra 2 voice, and
the SUSTAIN PEDAL ORC1 LCD dial to turn
sustain on or off for the orchestra 1 voice.
NOTES
• The sustain effect is applied to the specified orchestra
part(s) only when the panel [SUSTAIN] button is turned
on or when the sustain pedal is pressed.

PITCH BEND WHEEL

Determines whether the PITCH BEND wheel
will affect the orchestra 1 voice, the orchestra 2
voice, or both orchestra voices.
Use the PITCH BEND WHEEL ORC2 LCD
dial to turn pitch bend on or off for the orchestra 2
voice, and the PITCH BEND WHEEL ORC1 LCD
dial to turn pitch bend on or off for the orchestra 1
voice.
NOTES
• If, for example, you're using the split mode (ORCH.
2 v 1) with a bass voice on the left and a sax voice on
the right, you'll want pitch bend to apply only to the
right-hand sax voice. In this case simply turn orchestra
1 pitch bend on and orchestra 2 pitch bend off.
• If AUTO BASS CHORD is on and the ORCH. 2 v 1
orchestration mode is selected, no pitch bend is ap-
plied to the ORCH. 2 voice.
.........................................................................................................
F3: Controller
87